Wireless Parking Radar Front and Rear Car Parking Sensor

• Kind: Parking Sensor
• Test Distance: 2.5-0.3m
• Warning Type: Bumming
• Probe Number: 4
• Certification: CE, FCC, RoHS
• Working Principle: Ultrosonic Wave
• Model NO.: CB01-4T0
• Operating Temperature Range: -20°C~+80°C
• Technich Type: Ultrosonic
• Installation Method: Open-hole Type
• Brand: June
• Product Name: Parking Radar Front and Rear Car Parking Sensor
• Function: Front and Rear Parking Sensor in One
• Sensor Diameter: 18.5mm
• Sensor Cable: 2.5m with IP67 Waterproof Connector
• Buzzer Cable: 2 Meter
• Towbar and Spare Tire: Support with 25cm Offset by DIP Switch
• Side Sensor Detection: Limited to 80cm by DIP Switch to Avoid False Alarm
• Front Bumper: Supported
• Buzzer Sound Alarm: High-Low-off Adjustable
• Power Cable: 1.5 Meter
• Transport Package: Netural Package
• Specification: 530mm*230mm*290mm
• Origin: Shenzhen, Guangdong
• HS Code: 8512301900
• Production Capacity: 3000 Pieces/Month

Product Description

Vehicle Reversing Front Bumper Parking Reverse Sensor Cost

Model number	CB01-4T0.
Sensor diameter	18.5mm
Sensor cable	2.5m with IP67 waterproof connector.
Sensor detection	0-2.5m.
Display range	0-2.5m for rear system, 0-1.2m for front system.
Built-in buzzer range	30cm-1.5m for reverse sensor and 30cm-80cm for front sensor.
Distance readout	Meter and Feet free change
Warranty	1 year

CB01-4T0 rear car parking sensors can be installed either on front bumper or on rear bumper.
Distance data can be output by feet or meter. 

Specifications
1) Car Front & Rear 4 Parking Sensor System , fit for all passenger cars;
3) Sensor diameter:18.5mm.
4) Sensor cable:2.5m with IP67 waterproof connector.
5) Sensor detection:0-2.5m. 
6) Display range:0-2.5m for rear system, and 0-1.2m for front sensor sytem.
7) Built-in buzzer range:30cm-1.5m for rear sensor system and 30cm-80cm for front sensor system.  
8) Sensor sensitivity is adjustable. You can adjust sensor sensitivity by yourself if it's too strong or too weak. 

9) You can also choose the front parking sensor system to install at front or rear parking sensor system to
install at rear bumper by your choice.  There are brake activiation and speed activation availble. You can adjust CONFIG1 switch to choose front system or off to as rear system. CONFIG 2 on to choose speed activation and off to choose brake activation for front system. 



10) CONFIG3 OFF to make side sensor detection limited to 80cm to avoid side sensor strong detection. System will not make bip alarm or show distance more than 80cm. It can avoid the annoying bip sound. 

11) CONFIG4 to remember 25cm from the rear bumper for tow-bar and spare tire. Pls do not remove the spare tire or tow bar after the parking sensor system remembered. If removed, system will mark it as obstacle and alert drivers again. 


12) Buzzer working distance is from 0-80cm for front system and 0-1.5m for rear system. And your LED display will show to relative light color (red-yellow-green) accordingly. 
13) Pls install the sensors not less than 45cm to avoid detecting ground. And turn a certain angle forside sensors. 

Package and Shipping. 
Neutral Package: 
QTY: 12.0 SETS . 
N.W.:8.5 KGS . 
G.W.: 9.5 KGS . 
Volume:0.042 cubic meter